Once the connectors and battery tray have been cleaned, the new battery pack can be installed. While installing make sure you connect the black wire to the negative terminal and the red wire to
Replacing a Car Battery. In many cases, replacing a car battery is relatively simple. Before you begin, make sure you have a work area with good ventilation and good lighting. If necessary, set up work lights so you have a good view of the area. If you’re not comfortable working on your car or replacing a car battery, leave the work to a
My battery terminals were really corroded. It was so bad that the bolts and nuts could not be saved. When I got a new set of bolts and nuts, even though they Option 1: With Wire Cutters. If you can’t pull a crimped terminal from its starter or alternator cable, then the best course is to use wire cutters. If the terminal appears structurally sound, then you can go ahead and cut the terminal with the wire cutter. Option 2: With a Screwdriver.Locate the positive (+) battery terminal and take note of it. This will help you install your new battery correctly. Loosen the screws on the cable clamps to disconnect the battery terminals. Remove the negative (-) cable before the positive cable. After disconnecting the battery terminal cables, you may now unfasten the battery hold-down strap.
Set the parking brakes, turn off the ignition and remove the keys. Open the hoods of both cars and find the battery terminals. Usually, the terminals are red or black and you will see a + (red) and – (black) sign on the top. Tightly attach the red, positive cable clamp to the red, positive terminal of the dead battery. tshM. 337 52 122 493 297 246 436 435 233